K1330 Kipp Hexagon bolts with narrow shaft in Hygienic DESIGN

Stainless steel 1.4404.
Narrow shaft bolts are preferably secured against unintentional loss with a retaining
element. This satisfies the EU standard 2006/42/EG. With the optionally available
retaining washer the bolt is permanently combined with the component before
screwing in. The washer is screwed over the threaded section and can then move
freely on the narrow shaft. The shaft is not damaged by e.g. notching caused by a
spring effect. By manual operation it is not possible that the washer screws itself out
again. However, by careful manipulation the washer can be removed from the bolt
without damaging either.
The surface of the hexagon head bolt is polished and, with regard to design
optimised for the use in hygienic environments. The bolt head is convex on the
top face and the collar has a conical formed top surface. Instead of troublesome
embossing or indentations, the bolt head is smooth with a surface finish of less than
Ra 0.8 μm. Dirt and residue from products or cleaners seldom adheres and easy
cleaning is ensured.
On request:
Inch threads, thread lengths, shaft lengths
Locking washer K1331.

Here is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table in the datasheet.

Download Datasheet K1330 Kipp Hexagon bolts with narrow shaft in Hygienic DESIGN