Norelem 21334-05 Telescopic slides, steel for surface mounting, partial extension both sides, load capacity up to 35 kg
Product Specification Datasheet for Norelem 21334-05 Telescopic slides, steel for surface mounting, partial extension both sides, load capacity up to 35 kgView CAD Files
Pulls out in both directions – Light running – Precise guidance for high lateral stability
On telescopic slides with partial extension both sides, the travel is less than the installed length. These are a low-cost solution for guiding drawers or similar items with little friction and high lateral stability. Latches in the middle position. The side fasteners on the inner rail are replaced by support brackets. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 50,000 cycles.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
- Not suitable for horizontal mounting.
- Material: Slides – steel, Ball cages – steel, Balls – steel.
- Version: Slides – electro zinc-plated. Ball cages – electro zinc-plated. Balls – hardened.
- Note for ordering: Sold in pairs. Fastening material included.
Order No: 21334-05-0305 21334-05-0356 21334-05-0406 21334-05-0457 21334-05-0508 21334-05-0558 21334-05-0610 21334-05-0660 21334-05-0711 21334-05-0305 21334-05-0356 21334-05-0406 21334-05-0457 21334-05-0508 21334-05-0558 21334-05-0610 21334-05-0660 21334-05-0711
Norelem 20054 Lifting units pneumatic with round guides
Norelem 80150_A Connectors with screw fitting, Form A
Norelem 20034 Linear modules pneumatic with rail guide
Norelem 20062-026 Rotary module pneumatic heavy duty version
Norelem 20036 Linear modules pneumatic with rail guide
Norelem 20060-024 Rotary module pneumatic