20000 Electric linear and gantry modules

Linear actuators with toothed belt drive and profile guide rail, Protective caps, slot tables, motor adapter sets and synchronisation sets. Includes linear actuators in standard lengths with strokes from 200 to 1500 mm. Special lengths are available on request.

Linear actuators with toothed belt drive and profile guide rail

Linear actuators set large bodies in motion. They can absorb the highest forces in all directions. They are therefore the optimal solution when automated linear movements are involved. This product range includes linear actuators in standard lengths with strokes from 200 to 1500 mm. Special lengths are available on request.

Advantages:

– Toothed belt drive for smooth, synchronous running
– Precise rail guide for constant high loads in all directions
– Sealed bearings

Protective caps

Protective caps are used to protect the open shaft ends from dust and dirt. They close off unused hollow shafts at the bearing housing. These protective caps are available in two different sizes.

Slot tables

The additional centring hole at each threaded hole ensures that slot tables are fitted precisely onto the carriages on the linear guides. The profile slots on the top also provide universal mounting possibilities.

Motor adapter sets

Motor adapter sets are fitted with elastomer jaw coupling systems, which make it easy to connect electric motors. They have very good retaining forces, they are free of play, and are also vibration damping and electrically isolating.

Synchronisation sets

The synchronisation sets enable two parallel linear actuators to be driven by just one motor. They consist of two couplings which are connected by a synchronous shaft.